An impressive intermediate aerobat!
Harriers. Torque rolls. Knife-edge maneuvers. The YAK 54 Mk2 can do them all – and then some – whether you install glow, gasoline or electric power! Features laser-cut all-wood construction, a removable canopy, high-quality film covering, a bolt-on two-piece wing, a painted pilot figure and more.
Capable of precise and extreme 3D aerobatics.
Compatible with glow, gasoline or electric power.
Extremely lightweight, laser-cut all-wood construction.
Factory-painted fiberglass cowl.
High-quality film covering.
Bolt-on two-piece wing with NACA airfoils.
Painted, preinstalled pilot figure.
Aluminum main landing gear.
Spring wire tail gear.
All hardware included.
Compatible with glow, gasoline and electric power!
Bolt-on two-piece wing
Notes from our tech department:
This is the Radio Controlled, Electric, Gasoline, or Glow Powered, 1/4 scale
Almost Ready to Fly Phoenix Model Yak 54 1.20/20cc Airplane.
Capable of both precise and extreme 3D aerobatics
For Intermediate Modeler/Fliers.
Construction: Laser cut balsa and light plywood
Wing: 2 piece w/all wood construction, ailerons pre-installed,
aluminum wing joiner
Aileron Control: Dual servo
Covering: High quality heat shrink covering
Radio Compartment: Plywood reinforced
Cowling: Pre-painted Fiberglass
prebent aluminum tail gear
Wheels: Two 4.25″ (108mm) rubber main, one 1″ (25mm) tail wheel
Fuel Tank w/pre-assembled stopper, approximately 24oz (720cc)
Spinner: Plastic construction red in color, 2.7″ (70mm) diameter
Engine Mount: Two-piece composite plastic
Motor Mount: Plywood with aluminum standoffs
Warranty Period: 90 day limited warranty
ARF Super Cub PA-18 Airplane with Landing Gear, Wheels, Fuel Tank,
Decals, Spinner, Instrument Panel, Pilot, Instruction Manual and
For Glow Operation;
Engine: 1.20 2-stroke, or 1.40 4-stroke
For Gasoline Operation;
For Electric Operation;
Brushless Motor: 1600-2000W
LiPo Battery: 5S-6S up to 5500 – 6000mAh
Servos: Six standard high-torque (2-aileron; 2-elevator;
1-rudder; 1 throttle)
Y-Harness: One for aileron servos
Receiver Battery: 4.8-6V 1200-2000mAh NiMH
Misc. Items: 1/4″ foam rubber padding, medium fuel tubing,
propeller, building and field equipment.
Wingspan: 66.3″ (1684mm)
Weight: 10.3 – 11.4lb (4700 – 5200g)
Length: 63.1″ (1605mm)
Wing Area: 848 sq in (54.7 sq dm)
Wing Loading: 28.50 oz sq/in (87 g sq/dm)
Wing Type: NACA Airfoil
Servo Mount: 0.83 x 1.6″ (21 x 42mm)
Center of Gravity: Per updated information from the factory, the CG
range is 5.5 – 5.9″ (140 -150mm) back from the wing’s leading
edge measured at the fuselage
Control Throws- High Rate Low Rate
Elevator: 0.43″ (11mm) 12% expo 0.51″ (13mm) 12% expo
Rudder: 1.4″ (35mm) 15% expo 2.4″ (60mm) 15% expo
Ailerons: 0.43″ (11mm) 10% expo 0.51″ (13mm) 10% expo
There are no reviews yet.