Product Description
Description
GEP-VTX58200-M is Mini Vtx, Transmit power 4 gear switch: 0mw/25mW/100mW/200mWm, Support 48 channel.
#Please install antenna (must be done) before debugging or testing VTX（and OSD）, or lead to VTX not working properly.
Features:
1.Support Power tuning;
2.Transmit power 4 gear switch: 0mw/25mW/100mW/200mW;
3.The output power is stable ,the far transmission distance: ≥0.6km@25mW, ≥1km@100mW, ≥ 1.5km@200mW
4.Output 48 frequency points, and has R group 8 race frequency at the same time using each other without interference;
5.Frequency lock fast, boot does not interfere with companions;
6.Full format video format: NTSC /PAL;
7.Wide input voltage range. low power consumption; 7V～24V, +12V/170mA@200mW;
8.Small volume: 25mm×25mm×4.5mm;mounting holes 20mm×20mm(4 * M2) correspond exactly mini CC3D NAZE32 F3 F4 Flying control
9.Light weight: ≤3.5g(including antenna)
Specifications：
1.Channel output : 48Ch(A,B,E,F,H,R)
2.Input voltage : 7-24V DC (2-6S)
3.Vtx output the camera voltage: 5v
4.Power transmission: 0mW / 25mW / 100mW / 200mW
5.Size (mm): 25 * 25 * 4.5
6.Mounting Holes Dimension:20*20mm
7.Connector type: IPEX Connector
8.Weight: 3.5g(including antenna)
How to use?
1． Set the Channel
In standby mode, press and hold the key for 3 seconds, the blue LED flashes, short press, change the channel value.Every time 1 press will change the CH, followed by 1CH to 8CH cycles.
2．Set the Band
In the channel setting mode, press and hold the key for 3 seconds, the green LED flashes, briefly presses, changes the frequency group value.Every time 1 press will change the band, and then the A band to F band loop.
3.Set the Power
In the band setting mode, press and hold the key for 3 seconds, the red LED flashes, short press, change the output power value.Every time 1 press will change the power, followed by 25mW / 100mW / 200mW cycle.
CONNECTIONS
Reviews
There are no reviews yet.