Product Description
FEATURES
Selectable S-FHSS and FHSS modes, the included R2006GS receiver
automatically adapts to the selected mode
Capable of 4 channels only in FHSS mode
Fail safe on all channels in S-FHSS mode only (throttle channel only
when FHSS mode is selected)
15 model memory with 4 character model naming
40×40 127 segment LCD display
Modes 1-4 selectable by pilot
R2006GS high-voltage (4.8 – 7.4V) 6-channel receiver with Easy-Link
circuitry, frequency hopping, spread spectrum design and Dual
Antenna Diversity
Endpoint adjustment (EPA), sub trims, servo reversing & throttle cut
Throttle position, mix and low battery warnings
Trainer system (trainer cord not included)
purchase
Airplane Features;
Two programmable mixes and two 5-point throttle curves
Two 5-point pitch curves
Flaperon with differential rate
Flap trim (2 rates)
V-tail mixing
Elevon mixing
Helicopter Features;
Two 5-point throttle curves
Three 5-point pitch curves
Throttle hold
Hover pitch
Gyro and revo mixing
Four swash plate types (H1, H3, HR3 & H3 w/AFR)
Swash AFR (ail/ele/pitch)
Throttle mix
Electronic swash ring
Throttle and pitch delay
INCLUDES
Futaba 6J 6-Channel Transmitter, R2006GS Receiver, Instruction
Manual, Neckstrap and Smooth Ratchet Plate for Heli Throttle
REQUIREMENTS
AA Cells: Four for transmitter
Servos of modeler’s choice
Receiver battery
SPECIFICATIONS
Transmitter;
Type: 2-stick, 6-channel, FHSS/S-FHSS selectable
Frame Rate: 6.8ms
Current Drain: 170mA
Receiver;
Modes: FHSS or S-FHSS (auto selectable)
Power Requirements: 4.8V-7.4V
Compatible Batteries: NiCd, NiMH, LiPo, LiIon & LiFe
Dimensions: 1-11/16 x 15/16 x 5/16″ (43 x 24 x 7.9mm)
Weight: 0.29oz (8.3g)
Current Drain: 80mA (@ no signal)
COMMENTS
To use the NiMH battery FUTM1482, you will need to purchase
charger FUTM1832. Then call Futaba Services at 217-398-8970
option 2 and they can sell you a battery door- HSP82469. If
you already have a charger and need a charge lead they can
sell you part number- HSP29615. (requires soldering on the
correct charger plugs)
You may also use a 2C 6.6V LiFe battery such as HCAM6521
Reviews
There are no reviews yet.