r58wrag_1
6_547c509d-1d90-4d50-8a73-42bbcb610278_1800x18006_5d7f718a-8497-4aca-a121-9258e8a5c77a_1800x18001_13da883f-e709-4538-9dc5-acb61e0dd53b_1800x1800

ToolkitRC M6 V2.0 150W 10A Charger, Cell Checker, Servo Tester

0 Tomans

The Toolkit RC M6 V2.0 is a small 150w color screen charger! At heart, the M6 is a small and compact charger that boasts a wide array of other features not found in chargers on the market.

Category:

Product Description

The Toolkit RC M6 V2.0 is a small 150w color screen charger! At heart, the M6 is a small and compact charger that boasts a wide array of other features not found in chargers on the market. Additional functionality includes a servo tester, battery cell checker, wattmeter (power meter), PWM/PPM/S.Bus input testers (for receiver testing), as well as output generators that offer variable voltage and amperage with DC current.
Toolkit M6 Features

Battery Charger
Cell Checker
Servo Tester
PWM,PPM, S.Bus Input/output & Receiver tester
Viable AMP/Volt DC Power supply (Requires external DC input)

Charger Features

Lithium battery cut-off voltage can be set (TVC function)
Measure battery voltage, internal resistance, balance
Measure PWM,PPM, S.Bus signal values @ 1ms accuracy
Output PWM, PPM, S.Bus standard signal @ 1ms accuracy
The customizable 1-28V constant output voltage, 1-10A constant output current
Multi-language optional
USB 2.1A@5.0V Output (Mobile device charging)
U-disk firmware upgrade (Slave device)

Charger

Input voltage: 7.0-28V
Type of battery: Lipo, LiHV, LiFe, Lion @ 1-6S, NiMh @ 1-16S, Pb @ 1-10S
Charge power: 150W / Up to 10A
Discharge power: Recycle Mode: 150W/ Up to 10A Normal Mode: 8W @ Up to 2A
USB: 2.1A @ 5.0V (Mobile Charging) or USB Firmware updating
Dimensions: 68x49x26mm
Weight: 80g
LCD: 1.8inch TFT RGB, 160×128 Pixel

Measurement

PWM: 880-2200us @ 20-400Hz
PPM: 880-2200us*8CH @ 20-50Hz
SBUS: 880-2200us*16CH @ 20-100Hz
Voltage: 1.0-5.0V @ 1-6S
IR: 10-99mR @ 1-6S

Output

PWM: 500-2500us @ 20-1000Hz
PPM: 880-2200us*8CH @ 50Hz
SBUS: 880-2200us*16CH @ 74Hz
Power: 1-10A @ 1-28V Mode:CC+CV
User Manual & Firmware
Error Codes

1.over current
2.overvoltage
3.over temperature
4.timeout
5.battery is invalid
6.input low
7.input is too high
8.balance is complete
9.is not connected to the balance port
10.not connected to the main port
11.timeout
12.types do not match
13.cells error
14.battery needs to be balanced
15.This mode is not rechargeable

Reviews

There are no reviews yet.

Be the first to review “ToolkitRC M6 V2.0 150W 10A Charger, Cell Checker, Servo Tester”