Product Description
R3008SB Receiver
The R3008SB is a T-FHSS telemetry-capable receiver that features S.Bus and S.Bus2 compatibility, with 8 conventional ports. The receiver also features an external battery voltage connector for the CA-RVIN-700 External Voltage Cable (FUTM5551 – not included).
System Features:
Futaba T-FHSS, S-FHSS 2.4GHz security
Airplane, heli, glider and multi-rotor software
30-model memory
S.Bus capable T-FHSS receiver
Telemetry
Synthesized voice for telemetry data
Vibration alerts for alarm conditions and low battery
User-updatable software (*requires optional CIU-2 interface)
Wireless data transfer among 10J transmitters
Built-in S.Bus programming link for S.Bus servos
10-character model and user naming
Large (128 x 64 dot) backlit LCD display
10 channels (one variable knob, five 2-position switches, two 3-position switches, one momentary switch, two digital levers)
Built-in diversity antenna
Jog dial and 3 buttons for fast, easy programming
Sub-trim and fail-safe (all channels)
Servo reversing, endpoint adjustment, digital trims, dual rates/exponential* & ATL
Trim step adjustability
Trainer system
Throttle cut
2 count-up/-down timers + integrated timer
Model timer
Range check mode
Servo cycle w/bar graph displays
Assignable switch/lever/functions (Ch. 5-10)
Menu’s:
Airplane:
6 programmable mixes
9 factory-defined mixes
Flaperons with differential rate
Flap trim
Differential ailerons
Gyro sensitivity
5-point throttle & pitch curves
Throttle delay
Idle down
Helicopter:
6 programmable mixes
10 factory-defined mixes
8 swash plate types
5 flight conditions w/delay
Throttle curve (4 curves, 5 points)
Pitch curve (5 curves, 5 points)
Throttle hold & delay
Swash AFR
Electronic swash ring
Glider:
6 programmable mixes, plus:
3 factory-defined mixes
5 wing types
Gyro sensitivity
Motor menu
2 flight conditions
Multi-Rotor:
6 programmable mixes, plus:
Gyro sensitivity/mixing
Center stick alarm
Specifications:
Transmitter:
Type: 2-stick, 10 channel, T-FHSS Air-2.4GHz system
Transmitter Frequency: 2.4GHz band
System: T-FHSS Air, S-FHSS, switchable
Power Supply: 6.0V dry battery
R3008SB Receiver:
Type: T-FHSS Air-2.4GHz, dual antenna diversity, S.BUS system
Power Requirement: 4.8-7.4V battery or regulated output from ESC*
Size: 0.98×1.86×0.56″ (24.9×47.3×14.3mm)
Weight: 0.36oz (10.1g)
Battery F/S Voltage: Sets up with transmitter
*NOTE: When using ESC’s make sure the regulated output capacity meets usage application
Includes:
Futaba 10JA 2.4GHz 10-Channel S/FHSS Transmitter
R3008SB Receiver
FUTL7685 Switch Harness
Neck Strap
Instruction Manual
Reviews
There are no reviews yet.