Product Description
The Diatone Mamba F722 MK3 Basic Stack brings BIG power all in a 30.5 x 30.5 mounting size! This stack can push 45A all while bringing you the latest features!
Note: This is the No WiFi version.
Features
Gyro uses an independent Low Dropout Regulator (Low Dropout Regulator) and reduces ripple interference
The standard flight controller (30.5×30.5) adds a spare pad
Self-recovery insurance to the receiver’s 5V power supply
LED signal selection (when Mamba Led sys avaiable)
Increased camera VCC power supply pad
TVS instant high voltage protection 30V
BEC short circuit protection
Super Big Soldering Pad
Increased pad area
Updates
When you connect the USB, the receiver and OSD settings can be saved
Upgraded anti-interference cable
Added I2C function
USB Type-C
Specifications
MAMBA Basic F722 MK3 FC
BEC: 3.3V 0.5A& 5V 3A (System Power)& 5V 3A(LED)& 9V 3A
LED Controller: BF LED/MB LE（4 Set 2812 LED）
MCU: 216MHz STM32F722RET6
Input: 3~6S Lipo (12.6~25.2V)
Blackbox: 16M Flash Memory
MOUNTING: 30.5mm, M3
ESC Soft: Dshot300/600
ESC Telemetry: Yes
TVS Protection: Yes
GYRO: MPU6000
Power Led: Yes
Barometer: Yes
S/F.Port: Yes
Uarts: 6Set
OSD: Yes
RSSI: Yes
Buzz: Yes
MAMBA F45 128K ESC
INPUT VOLTAGE: 3~6S Lipo (12.6V~25.2V)
Target：BLHeli_32 MAMBA F45_128K
MOUNTING: 30.5×30.5mm ,M3/M2
CONTINUE CURRENT: 45A×4
BURST CURRENT: 55A (10S)
SOFT: Dshot300/600/1200
TVS Protection: Yes
BEC: No
Includes
1x Diatone Mamba Basic Stack – F722 MK3 FC + F55 55A 128K ESC
1x AMASS Original XT60
2x 12AWG 100mm Cable
1x 470uF/35V Capacitor
60x Hard Dampers
40x Soft Dampers
1x Hardware Kit
2x 8pin sh1.0
Reviews
There are no reviews yet.