RJX1177
RJX1106-5RJX1106-7RJX1176-3RJX1177-1RJX1177-4

RJX SP Racing F3 EVO Flight Controller with PDB Power Distribution Board

0 Tomans

Features:
–Support directly plug F3 andamp; F3EVO flight control
–Support 2-6S,when the input voltage is 2-3S , can choose the 12V output via welding spot for battery voltage.
–The camare and VTX voltage can choose the 5V 12V via welding spot.
–PCB with 2oz copper foil 4 layer board, ensure the large current.
–Can be used independently as a power distribution board, compatible with any FPV Multicopter flight control.

Out of stock

Product Description

http://www.rjxhobby.com/SPRacingF3EVO-Manual-latest.pdf

http://www.rjxhobby.com/SP Racing F3 Evo Flight Controller Guide.pdf

FLAH F3 EVO STEP

1.F3 EVO flight controller and PDB — This is the F3 EVO flight controllre,comes with a power distribution board specially design for F3 or F3 EVO FC. Not need to extra PDB, save your space.

2.STM32 F3 processor — Uses Next-generation STM32 F3 processor with hardware floating point unit for efficient flight calculations and faster ARM-Cortex M4 core

3.Micro SD Card Reader — can record flight data logs easily onto and SD card (not limited to 128mb like on other flight controllers)

4.The latest Accelerometer, Gyro and Mag/Compass and Baro/Altitude sensor technology

5.Specially designed PDB — Support directly plug F3 F3EVO flight control. Support 2-6S battery. PCB with 2oz copper foil 4 layer board, ensure the large current.Can be used independently as a power distribution board. Support 20A 30A ESCs

Product Description
PLS NOTE: Before soldering, pls contact with your computer by USB Cable to check if flight controller is fine. It is very hard to find out what is the problem after soldering.

Main Features of F3 EVO Flight controller:
1.Micro SD Card Reader-can record flight data logs easily onto and SD card (not limited to 128mb like on other flight controllers)
2.Stackable – Can mount onto compatible PDB’s or OSD’s with just 2through hole pins in each corner
3.Next-generation STM32 F3 processor with hardware floating point unit for efficient flight calculations and faster ARM-Cortex M4 core
4.The latest Accelerometer, Gyro and Mag/Compass and Baro/Altitude sensor technology
5.Race transponder built in – just turn up at a race and have your lap times recorded

Power Distribution Board specially design for F3/F3 EVO flight
Description:
Brand Name: RJX
Item Name: RJX SP Racing F3Evo flight controller with F3 or F3Evo Special PDB
Dimension:37.5*54.5mm
mounting houls:30.5*30.5mm
Input Voltage: Support 2-6S
Weight : 8g

Features:
–Support directly plug F3 andamp; F3EVO flight control
–Support 2-6S,when the input voltage is 2-3S , can choose the 12V output via welding spot for battery voltage.
–The camare and VTX voltage can choose the 5V 12V via welding spot.
–PCB with 2oz copper foil 4 layer board, ensure the large current.
–Can be used independently as a power distribution board, compatible with any FPV Multicopter flight control.

——————————————————–
Package Including
1 * F3 Evo Flight Controller

1 * F3 Special PDB Board

1 * Connection Accessories

Reviews

There are no reviews yet.

Be the first to review “RJX SP Racing F3 EVO Flight Controller with PDB Power Distribution Board”